The ECOTRON ® High Pressure Water Jet Pump is available in the power classes from 11 kW to 45 kW. The working pressure of 4,000 bar is the perfect balance between long maintenance intervals and high cutting speeds. The ECOTRON ® is our basic model with flow rates between 1.2 and 4.3 liters per minute and an operating pressure of 4,000 bar.
ECOTRON ® High Pressure Water Jet Pump is a European product.
This high pressure water jet pump is generated by an axial piston pump, precisely controlled by a standard proportional valve.
Due to the good equipment with a proportional valve in the hydraulics and the finely controllable relief valve, every cutting process can be optimized with the ECOTRON ® . With this you get the material-specific best high pressure for your cutting from the ECOTRON ® .
The high-quality reliable pressure intensifier and the large pulsation damper with a storage volume of 1.6 liters then ensure a uniform pressure signal in order to obtain a perfect cross-sectional image.
You get the best equipment already at the base model.
Drive power: 11 – 45 kW
Operating pressure: 4,000 bar
Flow rate: 1.2 – 4.3 l / min
Equipped as standard with oil / air cooler, the ECOTRON ® High Pressure Water Jet Pump not only saves money, but also protects the environment. The cooler is mounted inside the oil sump, which is not only a prerequisite for the CE marking, but also protects the environment in the event of a leak.
Service-friendliness is provided by well-visible pressure gauges in the front area of the pump as well as safety valve and high-pressure intensifier in working height. The oil tank is made of aluminum: here rust has no chance.
Double filter units hold back foreign substances in front of the intensifier and prevent damage.
The infinitely variable pressure adjustment takes place via a standard installed propotional valve. As standard, the on / off signal of the high pressure water jet valve in the pump can be processed. As a result, pressure peaks in the entire high-pressure system are avoided when closing the cutting head. More information can be found in the downloadable presentation.
The large-volume pulsation damper with 1.6 liter dampens pressure fluctuations to a minimum of 140 bar and thus ensures a good cutting pattern and low wear on high-pressure pipes and components.