SERVOTRON HIGH PRESSURE WATERJET CUTTING

THE NEXT EVOLUTION LEVEL OF PUMP TECHNOLOGY: ENERGY SAVING, HIGHLY EFFICIENT AND PROFESSIONAL.

The SERVOTRON ® is available in the power classes of 37 kW and 45 kW. Its operating pressure of 4,000 bar has been regarded as the optimum in the professional field of water jet cutting for many years.

TÜV Austria has confirmed that SERVOTRON ® saves more than 24% energy compared to conventional pumps. It is available with a flow rate of 3.8 liters per minute and 4.6 liters per minute.

Customers buy a European product

SERVOTRON ® High Pressure Water Jet Cutting is a European product.

  • because it is tailored to the needs of European companies.
  • because it was designed taking into account the responsible use of our resources.
  • because it is easy to maintain and fit all common metric tools.
  • because European standards and quality expectations are met.
Highly efficient servo motor for optimum pressure and water flow control

THE SOMETHING OTHER WORKING PRINCIPLE

The pressure is generated by a gear pump, precisely measured by an HD pressure transducer, paired with a frequency-controlled servomotor.

The operating conditions are measured here in the high pressure line and passed on to the controller. Thus, a control loop is formed, which reacts directly to the desired amount of water and water pressure. The engine can accelerate to 2,700 revolutions per minute in 60 milliseconds. When the cutting head is closed, the motor stops and consumes no energy. Thermally, the working method of the SERVOTRON ® has a much higher efficiency. See presentation in the download.

THE ADVANTAGES
  • More than 24% energy savings
  • Low noise level <73 dB (A)
  • Perfect control of the high pressure
  • Minimal pressure peaks

Water Jet Cutting Machine in Dubai

Water Jet Cutting Machine in Dubai

SERVOTRON ® 40.37 / 40.45 +

Drive power: 37/45 kW
Operating pressure: 4,000 bar
Flow rate:  3.8 / 4.6 l / min

The SERVOTRON® high-pressure intensifier:

MAINTENANCE FRIENDLINESS AND LONG SERVICE LIFE

 

Water Jet Cutting Machine in Dubai

THE CONTROL OF THE SERVOTRON® WATER JET CUTTING MACHINE

Electronic control with sensible extras as standard:
  • Various analysis functions by temperature sensors (see picture)
  • Master-slave function for up to three SERVOTRON ® is standard
  • Professional bus connection to the machine control
  • Frequency converter for controlling the servomotor
  • Soft start to avoid current peaks
  • Electronic logbook for production data acquisition

Water Jet Cutting Machine in Dubai

ADVANTAGES AT A GLANCE


Equipped as standard with an oil / air cooler, the SERVOTRON ®, water jet cutting machine, not only saves money but also protects the environment. The cooler is mounted inside the oil sump, which is not only a prerequisite for the CE marking, but also protects the environment in the event of a leak.

Serviceability is provided by the convenient control of the pump. Upcoming maintenance on the valves is indicated by temperature sensors. The safety valve and the high pressure intensifier are mounted at working height. The durable oil tank is made of aluminum: here rust has no chance.

Two filter units hold back foreign substances in front of the high pressure intensifier and prevent damage.

The large-volume pulsation damper of 2.49 liters dampens pressure fluctuations to a minimum of 140 bar and thus ensures a good cut and low wear on the pipes and high-pressure components.